Steel Platform
Steel platform is an engineering structure made of steel, which adopts a fully assembled design and is widely used in industry, warehousing, and construction.
Medium Duty Rack- type A
Sectional structure without any bolt;Nice appearance with simple
structure;Easy to install & disassemble;Pitch in 50mm to be and finish baking to pre-rust;It is suitable for super market and storehouse
etc.
| S/N | Size(LengthxDepth) | Capacity per layer | Height | Surface treatment | Size of upright |
| 1 | 1200x470mm | 300kgs | H=1.5,1.8,2.1,2.4m | Plastic spaying | 55x40x1.8mm,Pitch=50mm, |
| 2 | 1200x600mm | 300kgs | |||
| 3 | 1200x720mm | 300kgs | |||
| 4 | 1500x470mm | 250kgs | |||
| 5 | 1500x600mm | 250kgs | |||
| 6 | 1500x720mm | 250kgs | |||
| 7 | 1800x470mm | 200kgs | |||
| 8 | 1800x600mm | 200kgs | |||
| 9 | 1800x720mm | 200kgs |
Medium Duty Rack-type B
Luxurious and elegant;Optimizes warehouse space;The layer can be steel plate,wood board or galvanized panel;The height can be adjusted easily by 50mm per a pitch;Easy to assemble without any screw thread connectors
| S/N | L X D X H | Capacity per layer | Layer number | Surface treatment | Size of upright |
| 1 | 1200 x 500 x 1800mm | 300-500kgs | 4 | Powder coated | 55x47x2.0mm,Pitch=50mm |
| 2 | 1200 x 600 x 2000mm | 300-500kgs | 5 | ||
| 3 | 1200 x 700 x 2400mm | 300-500kgs | 6 | ||
| 4 | 1500 x 500 x 2000mm | 300-500kgs | 5 | ||
| 5 | 1500 x 600 x 2200mm | 300-500kgs | 6 | ||
| 6 | 1500 x 700 x 2500mm | 300-500kgs | 7 |
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.