VMC 500 CNC Vertical Machining Center
The machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
https://www.josencnc.com/VMC-500-CNC-Vertical-Machining-Center.html
1.This model is suitable for communication, medical equipment, power tools, automation parts, 3C products processing.
2.The main features of the machine are compact and flexible, fast displacement speed, high spindle speed, fast drilling and tapping, fast tool change, mainly used for processing light and small metals, not suitable for heavy cutting.
3.The three axes use ball screw and linear guide imported from Taiwan, with high rigidity, low noise, low friction and high sensitivity, which can improve the processing speed and accuracy.
4.Spindle short nose end design, the spindle motor transmission power to the maximum, cutting rigidity is excellent, improve the machining accuracy and extend the service life of the spindle.
5.The fully enclosed guard keeps smooth and low noise when moving at high speed, and isolates the chip liquid and chips to the greatest extent, so that the maintenance and service life of the wire rail and screw can reach the best state.
6.Z-axis is designed without counterweight, and the power of servo motor is deployed and the driving function of z-axis is improved to achieve high speed and the best surface finish of the product.
| ITEM | UNIT | TV-500 |
| Travel | ||
| X-axis travel | mm | 500 |
| Y-axis travel | mm | 400 |
| Z-axis travel | mm | 350 |
| Worktable size | ||
| Working table size (X*Y) | mm | 650×400 |
| Max.loading capacity of working table | kg | 250 |
| Table T-slot size (width * number of slots * spacing) | number | 14x3x125 |
| Spindle | ||
| Spindle speed | rpm | 20000 |
| Spindle drive form | Direct driven | |
| Spindle power | kW | 3.7/5.5 |
| Spindle bore specification | BT30 | |
| Distance from spindle to table surface | mm | 150-500 |
| Spindle feed | ||
| Rapid feed rate(X,Y,Z) | m/min | 48/48/48 |
| Cutting feed rate | mm/min | 10000 |
| Tool magazine(Optional) | ||
| Tool magazine capacity | arm type 21 | |
| Tool diameter/adjacent tool space | mm | Φ80/Φ80 |
| Max. Tool length | mm | 200 |
| Max. Tool weight | kg | 3 |
| Accuracy | ||
| Positioning accuracy | mm | ±0.005 |
| Reproduction accuracy | mm | ±0.003 |
| Others | ||
| Controller | kg/cm² | 0i-MF/M80 |
| Air pressure demand | kg/cm2 | 6 |
| Power demand | kVA | 20 |
| Machine weight | T | 2.8 |
| Model | A | D | E | F | G |
| TV-500 | 1630 | 2270 | 2270 | 2100 | 350 |
 |
|||||
| Model | A | B | C | D | E | F | G | H | I | J | K | T |
| TV-500 | 650 | 400 | 75 | 125 | 125 | – | – | 14 | 25 | 10 | 24 | 3 |
 |
||||||||||||
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
Reviews
There are no reviews yet.