Optimizing Cross Cut Saw MAXCUT CS15/15XL
MAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
OPTIMIZING CROSS CUT SAW MAXCUT CS15/15XL
UNION BROTHER have developed series of optimizing cross cut saws, based on different requirement of wood working manufacturing process. From PLC control, computer software control, to intelligent system solutions. MAXCUT CS15/CS15L is able to measure, optimize and cut off the timber almost simultaneously. MAXCUT CS15XL is especially suitable for relatively width value timber cutting. It could increase the timber output value by 3% to 5% safely and efficiently.
Cross cutting is very crucial in wood machining process, the Optimizing Cross Cut Saw will bring a fundamental innovation compare with the manual cutting. It will reduce the timber waste and prevent the potential risks to the operators.
Advantages
● Remove the defeats (burl, crack, head and end) marked on the timber.
● To measure, optimize and cut off simultaneously with high accuracy.
● To cut off large bending wood, such as rubber wood.
● To minimize the working load of the operators.
● To provide many optimizing modes, flexible for choose.
Applications
● Wood furniture
● Sofa manufacture
● Wood material preparation
● Laminated wood manufacture
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Waste Tyre Recycling Production Line
Contact UsPresently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature.
-
LFQ1300 Micro Computer Controlling Slitting Machine
Contact UsLFQ1300 Micro Computer Controlling Slitting Machine
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs!
Reviews
There are no reviews yet.