Inverted Vertical Wire Drawing Machine
Inverted wire drawing machine is my company introduced Italy advanced technology and designed a large plate heavy wire, large diameter drawing special equipment, easy to operate, reliable, high safety
Inverted wire drawing,Inverted Vertical wire drawing machine
. Low/High Carbon Steel Wire,Fastener,Nut, Screw,Bolt Wire Drawing Machine
– Suitable for materials such as: SAE1010, SAE1018, EN8D, EN19, EN24, 10B21, 15B25, 15B41, 10B35, 1541, etc.
– Used for applications like Fatener, Nut, Screw ,Bolt Wire, Building Wire,Spring wire, Mattress wire,.
Specifiaction:
Inverted wire drawing machine is my company introduced Italy advanced technology and designed a large plate heavy wire, large diameter drawing special equipment, easy to operate, reliable, high safety. Used for metal products, bolt wire, large diameter wire drawing industry.
Inverted wire drawing machine is a non-sliding way to pull high and low carbon steel wire, stainless steel wire, shaped steel wire, alloy wire, suitable for standard parts industry, supermarket shelf manufacturing industry steel wire processing enterprises.
Machine features: The transmission system adopts a strong V-belt combination hard gear reducer; pressure wheel; Down disk independent power and adjustable coil diameter AC frequency conversion speed regulation, easy operation, safe and reliable, energy saving more than 30%. Note: Drum diameter can be customized according to user requirements.
LD1200, LD1400 the above wire size 20mm: Uncolier wire feeder + Wire top pointing machine (cutting) + inverted wire drawing machine production line,
1. The wire transmission adopts programmable frequency control, which makes the stability of connecting with the wire drawing machine extremely high. For the safe production of the equipment, a number of safety protection devices are designed to make the equipment more stable operation, more safe and reliable. The wire feeding process is fully automatic and requires no manual operation.
2. Cutting mechanism: the transmission is controlled by hydraulic pressure, the operation is simple and flexible, and the cutting process is fully automated.
3. The control of the inverted wire drawing machine is a safe operation mode, which can immediately stop the emergency stop, disorderly line, broken line and electrical faults. The brake system is safe and reliable, easy and flexible, and the whole line operation process is more convenient and reliable
Parameter:
| NO | Capstan Dia(mm) | 700 | 800 | 1000 | 1200 | 1400 |
| 1 | Max.Iniet wire dia | 2.0~3.5mm | 3.0~4.2 mm | 5.0~5.5 mm | 6.0~6.5 mm | 6.5~7.5mm |
| 2 | Working speed | 60~120 m/min | 40~80 m/min | 40~80 m/min | 15~30 m/min | 10~30 m/min |
| 3 | Main motor power | 22~30KW | 37~45KW | 55~75KW | 75~110KW | 110~132KW |
| 4 | Max collecting wire | 1500KG | 2000 | 2500 | 2500 | 2500 |
| 5 | Wire inlet strength.Mpa | ≤ 1250 | ≤ 1250 | ≤ 1250 | ≤ 1250 | ≤ 1250 |
| 6 | Pay-off Type | As customers requirement or according actual demand | ||||
| 7 | Take-up Type | Collecting in coiler | ||||
Show Inverted wire drawing machine
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
12Kg Medium Torque Brushless Electric screwdriver Trigger start type
Contact UsBrushless DC voltage automatic medium torque electric screwdriver series
Model: GW-B6212LF
Torque: 2~12Kgf.cm
Free Speed: HI 2000 / LO 1500 r.p.m -
Capacity 1800ML Aseptic Bottle Suitable For Krones Machine
Contact UsBottle Volume: 1800ml
Bottle Type: Aseptic-filling bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export.
Reviews
There are no reviews yet.