Features
Single 3.3V power supply
Compatible with +5.0V logic levels
Common-mode input voltage range: -7V to +12V
Tri-state output
Half-duplex version available
Supports up to 32 transceivers per bus
Data transfer rate: 10Mbps
Current limiting and thermal shutdown prevent driver overload damage
ESD specifications
±15KV IEC61000-4-2 air discharge
±8KV human body model
Description
The MAX3485 is a low-power half-duplex transceiver compliant with RS-485 and RS-422 standards. This integrated circuit incorporates a driver and a receiver, with the driver operating at unrestricted slew rates to achieve data rates up to 10Mbps. When the driver is disabled and in either no-load or full-load conditions, these transceivers consume only 120μA to 500μA of supply current. All devices operate from a single 3.3V supply. The driver features short-circuit current limiting and overpower protection via a thermal shutdown circuit (which places the driver output into a high-impedance state). The receiver input features a fail-safe characteristic, ensuring the output remains at logic high when the input is open-circuited. The device offers ±8kV human body model (HBM) ESD immunity and passes the IEC 61000-4-2 ±15kV air discharge test.
Related products
-
Factory 3 inch 4 ohm_8 ohm 15w full range speaker 3 inch full range speaker $2.94-$4.40
Contact Us3″ (76mm) 15W 4Ω Full-Range Multimedia Speaker – Resonant Frequency (F₀): 106Hz, Frequency Response: up to 20kHz
Factory 3 Inch 4Ω/8Ω 15W Full Range Speaker -
HG4930 MEMS Inertial Measurement Unit
Contact UsThe HG4930 is a high-performance microelectromechanical systems (MEMS) inertial measurement unit (IMU) designed to meet the needs of a wide range of market applications in agriculture, AUV, industrial equipment, robotics, survey/mapping, stabilization platforms, transportation, unmanned aerial vehicles (UAVs), and unmanned ground vehicles (UGVs).
-
Thermal Conductive Graphite Sheet
Contact UsThermal conductive graphite sheet is a brand-new thermal conductive and heat-dissipating material, with unique grain orientation and uniform thermal conductivity in two directions.
-
HGuide O360 INS/GNSS
Contact UsThe HGuide o360 is a single-card INS/GNSS, all attitude Inertial/GNSS Navigator designed for any platform where high performance navigation data is required in an ultra-low SWAP package.






Reviews
There are no reviews yet.