Inverter all-in-one 30Kwh pack
This product is an all-in-one device that combines a 30-kWh energy storage battery with an inverter.
|
1~5set(USD) |
5~10set(USD) |
≥10set(USD) |
|
5700 |
5500 |
5300 |
 |
|
Product Name |
Inverter all-in-one 30Kwh pack |
|
Type |
LiFePO4 |
|
Size |
855*860&270 |
|
Weight |
300kg |
|
MOQ |
1set |
|
Voltage |
51.2V |
|
Cycle Life |
15000cycles |
|
Capacity |
30Kwh |
|
BMS type |
Hybrid Inverter |
Product advantages:
-
The battery uses CALB's new A-grade 280AH lithium iron phosphate battery, with a cycle life of ≥9000 times and can run stably for more than 10 years;
-
The battery itself is equipped with an inverter, so there is no need to purchase and install an inverter;
-
The inverter comes with a mains interface and a solar charging interface, which supports both mains charging and solar charging, and is easy to operate;
-
In stock at the Polish warehouse in Europe, express delivery is supported throughout Europe, and free home delivery is provided in most areas, with fast delivery speed, which can be delivered in as short as 1 day and up to 10 days;
-
The expandable stacked battery can be expanded to a maximum of 60 kWh, with sufficient capacity to fully meet daily household needs.
Warranty service:
We provide 2 years of free warranty and subsequent 3 years of paid maintenance.
Related products
-
Factory 3 inch 4 ohm_8 ohm 15w full range speaker 3 inch full range speaker $2.94-$4.40
Contact Us3″ (76mm) 15W 4Ω Full-Range Multimedia Speaker – Resonant Frequency (F₀): 106Hz, Frequency Response: up to 20kHz
Factory 3 Inch 4Ω/8Ω 15W Full Range Speaker -
SFP1G-SX-85
Contact UsMaximum transmission distance: 550m
Transmission rate: 1.25Gbps
Package type: SFP
Wavelength: 850nm
Fiber type: SMF
Optical interface: LC
Transmitted optical power: -9.5～-3dBm
Receiver sensitivity: < -17dBm
Operating temperature: 0~70°C (32~158°F) -
HAKRC 50A F4 Fly Tower
Contact UsHAKRC 45A F4V2 flying tower is equipped with BLS 45A four-in-one ESC and F405 flight control, Installation hole spacing of 30.5 * 30.5mm.
-
HGUIDE i300 MEMS Inertial Measurement Unit
Contact UsThe HGuide i300 is a high-performance
MEMS-based inertial measurement IMU designed to meet the needs of applications
in a variety of markets, including agriculture, AUVs, industrial equipment, robotics, mapping, stabilization platforms, transportation, drones, and unmanned ground vehicles. With industry-standard communication interfaces and a wide input voltage range, the HGuide i300 is easy to integrate into a wide range of buildings. Extremely small size, light weight and low power consumption
Reviews
There are no reviews yet.