Biomass Wood Chipper with Different Diameter of Processed Raw Materials
The drum chipper is composed of a base, a knife roller, upper and lower feeding mechanisms, a feeding device, a hydraulic buffer system and an electrical control system. It can cut logs, branches and twigs, board peels, waste veneers, bamboo, cotton stalks and other non-wood fiber stalks into chips of certain specifications.
The drum chipper has an advanced structure, high-quality chipped materials and wide adaptability to raw materials. It is convenient to operate and maintain, and can meet the production demands of different scales and types. Its superior performance and wide adaptability make the drum chipper an indispensable important equipment in industrial production.
Chipper Specifications& Models
|
Model |
BSR216 |
BSR218 |
BSR218D |
BSR2110 |
|
Main motor power(KW) |
55 |
110 |
132 |
220 |
|
Main motor start method |
Star triangle |
Star triangle |
Soft start |
Soft start |
|
Blade quantity（pcs） |
2 |
2 |
2 |
2*2 |
|
Infeed Opening Dimensions |
240×540 |
330×680 |
330×780 |
430×1050 |
|
The maximum diameter of the processed raw materials（mm） |
220 |
320 |
320 |
350 |
|
Chip length(mm) |
≤40 |
≤40 |
≤40 |
30/40 |
|
Capacity(T/H) |
4-6T |
10-15T |
12-18T |
35-45T |
|
Feed roller motor power(KW） |
2*3 |
2*4 |
2*5.5 |
2*7.5 |
|
Machine weight(T) |
4 |
7 |
8 |
12.5 |
|
Machine size(m) |
4.4*2.1*1.3 |
4.7*2.2*1.5 |
4.7*2.2*1.5 |
4.9*2.8*1.5 |
|
Technical parameters may be updated, please refer to the latest parameters |
||||
Related products
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
UT 1.6523/8620/20CrNiMoA Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Blockund Bar
Contact Us1.6523 Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Block/Round Bar
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.