YG815D-I Thermal and Wet Resistance Tester
It is used to measure the combustion performance of various textile fabrics in the horizontal direction and expressed by the flame spread rate.
It is used to measure the combustion performance of various textile fabrics in the horizontal direction and expressed by the flame spread rate.
FZ/T01028, ASTM D5132, JIS D1201, etc.
1. Combustion timing: any preset within 0.1s ~ 999.9s, the standard combustion time is 15s;
2. Ignition diameter: φ9.5mm;
3. The timing range of burning time is 0.01s～655.35s
4. Flame height: adjustable from 15mm to 65mm, the standard flame height is 38±2mm;
5. Gas source: industrial propane or butane gas, standard safety cylinder;
6. Air pressure after decompression: adjustable from 1KPa to 18KPa;
7. Dimensions: 390×230×590mm;
8. Weight: 24kg;
9. Power supply: AC220V/50Hz.
1. Microcomputer control, wide-screen LCD display.
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Waste Tyre Recycling Production Line
Contact UsPresently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature.
-
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line.
Reviews
There are no reviews yet.