Copper twisting machine
Wide range of applications: Suitable for multiple-strand core wires in high-frequency cables, data cables, computer cables, and power cables.
Application Scope:
Designed for multi-core strand winding in high-frequency cables, data transmission cables, computer cables, and power cables.
Production Efficiency:
Equipped with a high-speed rotation system, delivering output capacity up to twice that of conventional vertical models.
Tension Control Performance:
Ensures consistent tension from empty spool to full spool. Belt tension and wire tension remain stable throughout the entire winding process.
Tension Adjustment System:
Tension parameters are set via touchscreen interface and managed by PLC control, maintaining stable performance during start-up, operation, and deceleration.
Wire Arrangement Method:
Features axial traversing system with adjustable lay width and pitch, allowing flexible configuration based on production requirements.
Machine Upgrade:
Latest pull-type cantilever single-strand winding design offers improved winding precision and enhanced product quality.
| Model | JH300 | JH400 | JH500 | JH650 | ||||
| Machine Usage | Apply for bare copper wire、tinned wire、enameled wire twisted | |||||||
| Wire specification | φ0.05-0.26MM | φ0.08-0.45MM | φ0.08-0.45MM | φ0.10-1.0MM | ||||
| Stranding Sec.Area | 0.018-0.478mm² | 0.045-1.431mm² | 0.045-1.431mm² | 0.071-7.069mm² | ||||
| Pitch range | 1.92-24.22mm | 1.59-32.04mm | 4.25-45.52mm | 9.5-125mm | ||||
| Rotate speed | 3500RPM(7000t/min) | 3000RPM(6000t/min) | 3000RPM(6000t/min) | 1600RPM(3200t/min) | ||||
| Change the twist distance | Change the gear | Change the gear | Change the gear | Change the gear | ||||
| Take-up bobbin | φ300mm | φ400mm | φ500mm | φ650mm | ||||
| Power | 4KW | 5.5KW | 7.5KW | 7.5KW | ||||
| Stranding direction | "S"or"Z" direction, Adjustable | |||||||
| Take-up tension | Magnetic powder clutch control | |||||||
| Rolling rings unit | Wire-laying bearing type、 Adjustable layout and spacing | |||||||
| Noise level | Below 70dB | |||||||
| Lifting system | Hydraulic automatic lifting | |||||||
| Brake system | Electromagnetic brake automatic brake when internal and external wire break | |||||||
| Automatic oil injection system | Using an electronic hydraulic oil injection system, the oil injection time can be adjusted properly. There is no need for manual addition of bearing grease. | |||||||
Related products
-
Used NSC Schlumberger FM7N Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
-
Capacity 1258ML Hot Filling Suitable For Krones Machine
Contact UsBottle Volume: 1258ml
Bottle Type: hot-filling bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export. -
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
Reviews
There are no reviews yet.