300M motorized ultrasonic hardness tester
300M Motorized Ultrasonic Hardness Tester is a popular portable durometer made by our group.
Introduction:
300M Motorized Ultrasonic Hardness Tester is a popular portable durometer
made by our group. It applies method of ultrasonic contact impedance to make
hardness testing at the spot or in the laboratory.
300M is a perfect portable durometer for hardness testing about the coating
and plating, it can measure the hardness of chrome, copper plating, carburized
layer and Nitriding layer effectively.
300M is a NDT durometer due to the contact indention is too small to
observe, it is one of the excellent solution to test hardness of finished
products, such as, the mold, gear, shaft, rod, screw, rails, etc.
300M can not only work with the motorized probes, but also work with the
manual probes, which is able to meet the different application in light of
different condition of surface roughness.
Highlighting Characteristics:
Perfect Accuracy——±3% HV, ±1.5HR, ±3%HB.
Microscopic Indentation—— Only high-power microscope can observe the
indentation.
Quick Measurement——Result in 2 seconds.
Large LCD Display——Directly display measurement result, times count,
maximum, minimal, average and deviation.
Friendly Operation——Operate well after short training.
Promised Warranty——2-Year warranty for main unit (Excludes Probe).
Mass Storage——Save 1000 groups measurement data.
Simple Calibration——Save 20 groups calibration data for invoking, improve
calibration efficiency.
Product Details:
|
Commodity |
Ultrasonic Hardness Tester |
||||
|
Model |
300M |
||||
|
Code# |
882-141M |
||||
|
Optional Probe |
Manual Probe：10N、20N、49N、98N ;Motorized Probe：3N、5N、8N、10N |
||||
|
Measuring Range(DIN) |
HBS:100-500; HV:100-1500; HRC:20-68; HRB:55-100; HRA:37-85; Mpa: 255-2180N/mm |
||||
|
Measuring Accuracy（%） |
Scales |
﹤250HV |
250~500HV |
500~800Hv |
﹥800HV |
|
HV0.1 |
6 |
7 |
8 |
9 |
|
|
HV0.3 |
6 |
7 |
8 |
9 |
|
|
HV0.8 |
5 |
5 |
6 |
7 |
|
|
HV1 |
5 |
5 |
6 |
7 |
|
|
HV5 |
5 |
5 |
5 |
5 |
|
|
HV10 |
5 |
5 |
5 |
5 |
|
|
Hardness Scales |
Vickers (HV); Rockwell C(HRC); Rockwell A(HRA); Rockwell B(HRB);Brinell(HB) |
||||
|
LCD |
Color Screen |
||||
|
Data Display |
LCD Backlight, Adjustable |
||||
|
Language |
Chinese, English, German, Portuguese, Turkish |
||||
|
Data Output |
RS232 Hyper Terminal/Bluetooth Printer |
||||
|
|
Bluetooth |
||||
|
Data Storage |
To save 1000-groups of measuring data and 20-groups of calibration data |
||||
|
Word input |
Letters and numerals |
||||
|
Working Environment |
Temperature: -10°C to 50°C; Humidity :30%-80% R.H. |
||||
|
Battery Voltage |
Rechargeable lithium battery; Voltage :4.2V, 3200mAh |
||||
|
Recharger Voltage |
AC220V/50Hz, 110V/60Hz |
||||
|
Main unit Dimension and Weight |
Main unit Dimension :160 x 80 x 30mm (L x W x H); Manual Probe: Φ22×153mm; Weight (No Probe): 0.5Kg |
||||
|
Packing Dimension and Weight |
Packing Dimension 320 x 430 x 155mm (L x W x H) ; Packing Weight （Standard Delivery）4.3Kg |
||||
Related products
-
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
Reviews
There are no reviews yet.