VMC 500 CNC Vertical Machining Center
The machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
https://www.josencnc.com/VMC-500-CNC-Vertical-Machining-Center.html
1.This model is suitable for communication, medical equipment, power tools, automation parts, 3C products processing.
2.The main features of the machine are compact and flexible, fast displacement speed, high spindle speed, fast drilling and tapping, fast tool change, mainly used for processing light and small metals, not suitable for heavy cutting.
3.The three axes use ball screw and linear guide imported from Taiwan, with high rigidity, low noise, low friction and high sensitivity, which can improve the processing speed and accuracy.
4.Spindle short nose end design, the spindle motor transmission power to the maximum, cutting rigidity is excellent, improve the machining accuracy and extend the service life of the spindle.
5.The fully enclosed guard keeps smooth and low noise when moving at high speed, and isolates the chip liquid and chips to the greatest extent, so that the maintenance and service life of the wire rail and screw can reach the best state.
6.Z-axis is designed without counterweight, and the power of servo motor is deployed and the driving function of z-axis is improved to achieve high speed and the best surface finish of the product.
| ITEM | UNIT | TV-500 |
| Travel | ||
| X-axis travel | mm | 500 |
| Y-axis travel | mm | 400 |
| Z-axis travel | mm | 350 |
| Worktable size | ||
| Working table size (X*Y) | mm | 650×400 |
| Max.loading capacity of working table | kg | 250 |
| Table T-slot size (width * number of slots * spacing) | number | 14x3x125 |
| Spindle | ||
| Spindle speed | rpm | 20000 |
| Spindle drive form | Direct driven | |
| Spindle power | kW | 3.7/5.5 |
| Spindle bore specification | BT30 | |
| Distance from spindle to table surface | mm | 150-500 |
| Spindle feed | ||
| Rapid feed rate(X,Y,Z) | m/min | 48/48/48 |
| Cutting feed rate | mm/min | 10000 |
| Tool magazine(Optional) | ||
| Tool magazine capacity | arm type 21 | |
| Tool diameter/adjacent tool space | mm | Φ80/Φ80 |
| Max. Tool length | mm | 200 |
| Max. Tool weight | kg | 3 |
| Accuracy | ||
| Positioning accuracy | mm | ±0.005 |
| Reproduction accuracy | mm | ±0.003 |
| Others | ||
| Controller | kg/cm² | 0i-MF/M80 |
| Air pressure demand | kg/cm2 | 6 |
| Power demand | kVA | 20 |
| Machine weight | T | 2.8 |
| Model | A | D | E | F | G |
| TV-500 | 1630 | 2270 | 2270 | 2100 | 350 |
 |
|||||
| Model | A | B | C | D | E | F | G | H | I | J | K | T |
| TV-500 | 650 | 400 | 75 | 125 | 125 | – | – | 14 | 25 | 10 | 24 | 3 |
 |
||||||||||||
Related products
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
-
UT 1.6523/8620/20CrNiMoA Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Blockund Bar
Contact Us1.6523 Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Block/Round Bar
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
RO EDI
Contact UsOrisun group is specialize in supplying one stop solutions for whole manufacture chain. developing and manufacturing reverse osmosis water treatment for over 20 years.Our equipment is widely used in pharmacy industry , food and beverage industry , cosmetic industry , chemical industry, etc.As a leading provider of water treatment solutions ,our mission is to supply clean , healthy and safe water for all over the world.
Reviews
There are no reviews yet.