Electrode-posited copper foil equipment

1. Electrode posited copper foil machine equipped by titanium drum
corresponding ED machines complete with insoluble anodes and with attachment for
passivization of copper foils suitable for Lithium Ion Battery, copper clad
laminate(CCL), printed-circuit board(PCB), 5G communication, Standard copper
foil, High temperature and high elongation copper foil, Low profile copper
foil.

2. Types we supplied:

3. Technical parameters of ED equipment

3.1 Distance between anode and cathode(after DSA anode plate assembly): A ±
0.15 mm, A can be 10mm, 11mm etc.

3.2 Ti tank voltage: ≤ 6.0 V

3.3 Maximum current density:13000A/㎡

3.4 Immersion Rate ≥49%

3.5 DSA coating life of anode plate: Normal use of dual light lithium copper
foil 3600 hours

3.6 Anode plate: TA1 pure titanium back-pull anode plates with thickness of
5mm to 6mm

3.7 Ti drum driving force≥3KN

3.8 Winder driving force: 3KW

3.9 Anti-oxidation drive power: 1.95KW

3.10 Hot oven: high efficiency dryer, sealed circulation air duct, low energy
consumption, good demystification performance. Target wind temperature 150°,
foil surface temperature 70°

3.11 Online throwing: advance and retreat motor power 0.75KW; Swing motor
power 1.1kW; Drive motor power 3kW.

3.12 Maximum diameter of winding roller: Φ600 mm

3.13 Tension setting：0～1000 N

3.14 Production specifications of copper foil ≥ 4 µm

3.15 Total installed capacity: about 30 KW (excluding DC power supply)