| Tile | SIH 2.6 | SIH 2.9 | SIH 3.9 | SIH 4.8 |
| Pixel Pitch | 2.604 mm | 2.976 mm | 3.91 mm | 4.81 mm |
| Max Brightness Calibrated | 1000 nits (black) | 1000 nits (black) | 1000 nits (black) | 800 nits (black) |
| Panel Dimension | 1000 x 500 x 60 mm | 1000 x 500 x 60 mm | 1000 x 500 x 60 mm | 1000 x 500 x 60 mm |
| Panel Resolution ( H x V ) | 384 x 192 | 336 x 168 | 256 x 128 | 208 x 104 |
| Frame Material | Diecasting Aluminum Alloy | Diecasting Aluminum Alloy | Diecasting Aluminum Alloy | Diecasting Aluminum Alloy |
| Weight Per Panel | 9 kg | 9 kg | 9 kg | 9 kg |
| Power Consumption Max / Average | 500 W / 250 W Per ㎡ | 500 W / 250 W Per ㎡ | 500 W / 250 W Per ㎡ | 600 W / 300 W Per ㎡ |
| Transparency | Solid | Solid | Solid | Solid |
| Serviceability | Front | Front | Front | Front |
| Curving (Concave & Convex) | Custom 45° | Custom 45° | Custom 45° | Custom 45° |
| SMD Configuration | SMD2121 Black | SMD2121 Black | SMD2121 Black | SMD2121 Black |
| Physical Density | 147,456 Pixels / ㎡ | 112,896 Pixels / ㎡ | 65,536 Pixels / ㎡ | 43,264 Pixels / ㎡ |
| Viewing Angle ( H / V) | 160° / 140° | 160° / 140° | 160° / 140° | 160° / 140° |
| Refresh Rate | 3840 Hz | 3840 Hz | 3840 Hz | 3840 Hz |
| Gray Scale | 14 bit | 14 bit | 14 bit | 14 bit |
| Scan Ratio | 1/32 | 1/28 | 1/16 | 1/13 |
| Operational Temp / Humidity | – 20° ~ 45°C / 10-90% RH | – 20° ~ 45°C / 10-90% RH | – 20° ~ 45°C / 10-90% RH | – 20° ~ 45°C / 10-90% RH |
| Storage Temp / Humidity | – 40° ~ 60°C / 10-90% RH | – 40° ~ 60°C / 10-90% RH | – 40° ~ 60°C / 10-90% RH | – 40° ~ 60°C / 10-90% RH |
| IP Rating (Front / Rear) | IP30 / IP30 Indoor | IP30 / IP30 Indoor | IP30 / IP30 Indoor | IP30 / IP30 Indoor |
*Note: The specifications are for reference, actual values may vary.
Related products
-
GF-AB02 Thermal Gel
Contact UsZS-GF-AB30 is a kind of appearance paste two-component molding high thermal conductivity silicone gel, can be heated curing, with the characteristics of the higher the temperature the faster the curing. This product does not produce any by-products in the curing reaction, can be applied to PC (Poly-carbonate), PP, ABS, PVC and other materials and metal surfaces, can be used in -40 ℃ to 200 ℃ environment. It can be used in the environment from -40℃ to 200℃. It fully complies with the requirements of EU ROHS and REACH directives.
-
1500VDC Solar Surge Protector | 40kA Type 1+2 DC SPD for PV Systems
Contact UsCYD1-GD-PV series surge protector, protect against lightning surge voltages in solar system.They must be installed in parallel on the DC networks to be protected and provide protection.
-
HYLX/JL 16-40KW wall furnace exchanger
Contact UsSpecification:HYLX/JL 16-40KW wall furnace exchanger
Material:TP2 copper
Features:safety,efficiency,energy saving,environmental protection -
Epoxy fiberglass prepreg
Contact UsEpoxy Resin Prepreg has excellent bonding performance, good technological operation, wide window Good fluidity and wettability, low water absorption and good storage performance.






Reviews
There are no reviews yet.