Hydraulic swing beam shearing machine (QC12Y series)
Completely welded with steel plates the construction is firm and rigid
Strong hydraulic pump
Hydraulic overload protection
Hydraulic pressure sensing hold-downs
The front supports can hold and measure the work-pieces
Has piece receiver
Foot pedal with emergency stop
E21S NC control, motorized backgauge go to function
Programs storage
The blades gap can be adjusted by the hand-wheel
The machine tool adopts welded steel plate construction. Eliminate internal stress by heat treatment, assuring high strength, good rigidity, small deformation, easy operation and high endurance.
The machine with hydraulic driving system can run stably and repair easily. The upper die is sectional type that can combine to 0the different length willfully, suitable for the plate and case part’s manufacture. The working angle can be adjusted rapidly.
The machine is widely used by manufacturers for forming electrical and electronic switch boxes, which is also used in cooking utensil, furniture, all kinds of work-pieces, decorative industry and all shops of other industries.
Related products
-
Capacity 1800ML Aseptic Bottle Suitable For Krones Machine
Contact UsBottle Volume: 1800ml
Bottle Type: Aseptic-filling bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export. -
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.