HHJS Double Shaft Paddle Mixer
The HHJS double-shaft paddle mixer is a batch mixer, which mixes free-flowing dry solid materials evenly. Widely applicable to flour, feed, and other grain processing industry, for mixing materials.
The HHJS series dual axis high-efficiency mixer is widely used in industries such as feed, grain, chemical, pharmaceutical, etc. It is mainly suitable for mixing powder, granular, flake, or block materials in the production process of these industries;
Adopt double output shaft gear reducer direct transmission instead of the traditional chain drive double mode, more stable operation;
The classic double-shaft blade structure is adopted, and the weightless principle is used for mixing, with short mixing cycle and high mixing uniformity.
Increase the effective mixing volume, with a wide range of variable filling coefficients, allowing for simultaneous liquid addition and sufficient atomization to reduce agglomeration and agglomeration;
Special shaft end sealing mechanism to completely prevent material leakage;
High mixing uniformity, CV ≤ 5%;
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
Used NSC Schlumberger FM7N Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
Reviews
There are no reviews yet.