Hydraulic Discharging Machine Planetary Mixer Presser Extruder for High Viscosity Product
Hydraulic Discharging Machine Planetary Mixer Presser Extruder for High Viscosity Product
The discharging machine, also known as a press, presser, or extruder, is designed to remove high-viscosity materials from mixing tanks. It is compatible with hydraulic lift double shaft mixers, planetary mixers, and triple shaft mixers.
Driven by a hydraulic system, the press plate moves downward inside the tank to push the material toward the bottom discharge outlet, enabling efficient unloading of materials with limited flowability.
Key Features
-
Adjustable Pressing Parameters: Hydraulic pressure and press plate height can be adjusted according to material characteristics and operating requirements.
-
Reduced Material Residue: A sealing ring fitted around the press plate closely follows the tank's inner wall, helping minimize residual material after discharge.
-
Metering and Filling Compatibility: The discharge outlet can be connected to a metering device for measured filling or controlled material distribution.
-
Optional Stainless Steel Construction: Full stainless steel construction is available to meet specific process requirements.
-
Explosion-Proof Configuration: Customized explosion-proof designs are available for applicable operating environments.
-
Optional Contact Materials: Material-contacting components can be manufactured from SUS304 or SUS316L stainless steel.
Applications
Suitable for discharging high-viscosity materials, including:
-
Printing inks
-
Sealants
-
Hot melt adhesives
-
Magnetic media slurries
-
Creams and lotions
-
Toothpastes
-
Other viscous pastes and compounds
Competitive Advantages
Efficient Material Discharge
High-viscosity materials often have poor fluidity and cannot be discharged efficiently by gravity alone. Hydraulic pressing applies controlled force to move the material out of the tank, helping improve unloading efficiency and reduce manual handling.
Customized Configurations
The machine can be customized for specific process conditions, including high-temperature, high-pressure, flammable, explosive, or corrosive environments. Configuration and material selection can be adapted to the application requirements.
Related products
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Used NSC Schlumberger FM7N Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
Reviews
There are no reviews yet.