Plastic to Plastic (COMY PTP™)
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
COMY leverages its proprietary catalyst to efficiently convert mixed waste plastics into propylene. The process also generates by-products like BTX and liquefied substances, all derived from waste plastics and certified at GRS level. The PTP technology has multiple outstanding advantages.
Low-carbon and Eco-friendly
PTP dramatically cuts carbon emissions vs. petroleum-based products.
Recycling Traceability Certification
All components are sourced from waste plastics, and the production process complies with GRS certification standards.
High-Quality Products
Monomers achieve polymer-grade purity with minimal impurities.
Process
Plastic to Plastic enables the full closed-loop chain-waste plastic to pyrolysis oil to new plastic-within a single facility. All products come entirely from waste plastic, with no fuel oil produced, achieving true "oil-free purification." This means every ton of waste plastic is maximally converted into high-value resins (e.g., polypropylene) instead of being diverted to fuel, with higher recycling efficiency than traditional methods.
Related products
-
KSZHDM-03 Combined Grinding Dust Collector
Contact UsFeatures:
● Reasonable structure design facilitates dust settlement
● Convenient dust removal, automatic dust removal to ensure the continuity and efficiency of production
● Low noise and easy to use
● PLC control system control, humanized operation panel design, easy to use
● High filtration accuracy, high efficiency and long service life -
NZ-03 Nano-polyester for Drilling Fluid
Contact UsNZ-03 is a multi-polymer composed of alkane sulfonate, alkyl ester, crosslinking agent. It forms nano-solid sealing material through special technology. The special functional groups on the molecular chain has strong adsorption ability, and strong adhesion properties. NZ-03 reduces pore-pressure transmission by sealing pore throats and micro-fractures due to reasonable size distribution of NZ-03 in muds. It can be used in various water-base drilling fluids. Its recommend dosage is 1.0 – 3.0% (v/v).
-
Oil Injector for Drying Room Chain
Contact UsThe oil injection system adopts PLC automatic control.
-
Regenerative thermal incinerator (RTO)
Contact UsCoating, textile, pharmaceutical, chemical organic waste gas of low concentration, big air volume;
Reviews
There are no reviews yet.