FV8D Slewing Drive
YOJU integrates R&D, design, manufacturing, and sales. YOJU products are widely used in the field of Single Axis Tracker, Multiple Points Single Axis Tracker, Solar Parabolic Trough, Linear Fresnel…
FV/FM Series Specification:
The FV/FM family has enclosed housing and double oil seal design to minimize the frequency of maintenance. The customized housing for the solar tracking system can be directly installed on the tracker, reducing the overall cost of the tracker and saving installation time and procedures.
High tracking accuracy, High wind load resistance, Special design and materials used has 25+ years working life.
FV/FM Series Features:
● Design for Single Axis Trackers or applications requiring horizontal axis output;
● Double oil seal design, IP65, stronger anti-ultraviolet and anti-aging ability, less maintenance;
● Self-Locking gearset;
● Input, output and mounting are customizable;
● Single Point/ Multiple Points drive system optional;
● Hour-glass worm for more gear contact and longer working life.
FV/FM Series Performance Parameters:
Output Speed | Holding Torque | Rated Output Torque | Output Torque (Max.) | Gear Ratio | Tracking Precision | IP Class | Temperature |
<0.1RPM | 50 KN.M | 7000 N.M | 11000 N.M | 50:1 | ≤0.3° | IP 65 | -35~+70℃ |
36900 Ibf.Ft | 5166 Ibf.Ft | 8118 Ibf.Ft |
FV/FM Series Applications:
Single Axis Tracker, Multiple Points Single Axis Tracker, Solar Parabolic Trough, Linear Fresnel.
Related products
-
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
Optimizing Cross Cut Saw MAXCUT CS15/15XL
Contact UsMAX CUT CS15/15XL, as a relatively practical type of cross cut saw, it is designed for the bending timber, such as rubber wood.
Reviews
There are no reviews yet.