Motor factory test ZYDJ-9633A
Motor factory tested ZYDJ-9633A priced at 78,000 yuan/set
Motor factory tested ZYDJ-9633A priced at 78,000 yuan/set
1. Test items: DC resistance, electrical strength, insulation resistance, inter-turn insulation, no-load test, phase-to-phase withstand voltage;
2. Basic parameters: DC resistance (0.1~4000) Ω; electrical strength (0~4000) V/20mA; insulation resistance 500V/1000V, (5~600)MΩ; inter-turn insulation (0~5000) V; no load Test (10~300)V, (0.01~20)A; phase-to-phase withstand voltage: A.B, C, phase-to-phase electrical strength test; (0-4000V, leakage current 0-20ma);
3. All testing processes and controls are completed by microcomputer testing software.
4. All test data can be saved, printed and queried.
5. It can be divided into manual measurement and automatic measurement.
6. It has test data splitting function.
7. Duplex measurement.
8. It has unqualified alarm function.
9. Universal for single/three-phase testing. (option)
Related Products
Motor temperature rise test bench
Motor temperature rise test bench 2
AC and DC motor testing system
New energy performance test bench
Electric vehicle motor dynamometer
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
Small EDM Wire Cut Machine
Contact UsEconomic high speed edm wire cut machine.
Main Features:
Roller for X/Y axis, also called hard rail ( V rail);
With ±3° taper as standard, ±15°, ±30°, ±45° as option;
Accuracy: ±0.01/300mm;
Roughness: Ra 1.0-2.5 µm;
Low consumption, material saving. -
UT 1.6523/8620/20CrNiMoA Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Blockund Bar
Contact Us1.6523 Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Block/Round Bar
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs!
Reviews
There are no reviews yet.