Continuous sucker rod
A comprehensive enterprise integrating scientific research, development, manufacturing and operation service of Continuous sucker rod, follow industry standard SY / T6585 “Continuous Sucker Rod” ,obtained the national small and medium-sized enterprise venture fund aid financially. The annual output reaches to 1.0 million meters and service capacity about 1000 wells.
Continuous sucker rod adopts quality chrome-molybdenum alloy steel rolled by special manufacturing process with round or elliptical section. Finished product is a combination of continuous sucker rods designed in different sizes and of different stresses, which are welded together through advanced welding procedure. No couplings exist.
PRODUCT INTRODUCTION/OVERVIEW
A comprehensive enterprise integrating scientific research, development, manufacturing and operation service of Continuous sucker rod, follow industry standard SY / T6585 "Continuous Sucker Rod” ,obtained the national small and medium-sized enterprise venture fund aid financially. The annual output reaches to 1.0 million meters and service capacity about 1000 wells.
Continuous sucker rod adopts quality chrome-molybdenum alloy steel rolled by special manufacturing process with round or elliptical section. Finished product is a combination of continuous sucker rods designed in different sizes and of different stresses, which are welded together through advanced welding procedure. No couplings exist.
Continuous sucker rod technical advantages
1 .Reduce the failure frequency of sucker rod;
2. Reduce the wear of sucker rod and tubing:
3. Reduce the working stress of sucker rod:
4.Increase the annulus area of sucker rod between tubing, reduce the flow resistance:
5.Can choose small diameter tubing, save tubing use cost:
6.Improve the service efficiency and lighten the labor intensity.
PRODUCT DETAILS
CONTINUOUS SUCKER ROD SPECIFICATIONS
|
Continuous sucker rod |
Nominal size of the rod body mm |
Cross section area mm2 |
Pin end |
Maximum allowable stress KN |
Maximum allowable torque Nm |
|
LG16 |
16 |
198 |
3/4 |
130 |
|
|
LG19 |
19 |
285 |
3/4 |
190 |
|
|
LG22 |
22 |
387 |
7/8 |
250 |
|
|
LG25 |
25 |
506 |
7/8, 1 |
330 |
|
|
LG27 |
27 |
572 |
1 |
380 |
|
|
LG29 |
29 |
642 |
1 1/8 |
430 |
|
|
LGY16 |
16 |
198 |
3/4 |
130 |
|
|
LGY19 |
19 |
285 |
3/4, 7/8 |
190 |
|
|
LGY20 |
20 |
314 |
3/4, 7/8 |
200 |
600 |
|
LGY22 |
22 |
387 |
7/8 |
250 |
800 |
|
LGY25 |
25 |
506 |
7/8, 1 |
330 |
1150 |
|
LGY28 |
28 |
615 |
1, 1 1/8 |
410 |
1700 |
|
LGY29 |
29 |
642 |
1 1/8 |
430 |
1850 |
|
LGY30 |
30 |
706 |
1, 1 1/8 |
470 |
2200 |
Related products
-
Vacuum Feeding Tank
Contact UsThe vacuum feeding tank is the core component of the EB furnace melting system. responsible for feeding raw materials (such as titanium sponge, titanium residue or titanium alloy waste) into the melti
-
INDUSTRIAL DIRECT GAS FIRED TUNNEL OVEN
Contact UsSuitable for a variety of products baking, there are several choices for the type of transporting belt, you can choose the best type based on the products to be baked.
-
OIL SPRAY MACHINE
Contact UsGuangdong Baimai Equipment Technology Company was established in Dongguan, the city is located in China’s global bay area “Guangdong-Hong Kong-Macao Greater Bay Area”, known for its manufacturing.
-
OR Raceway Grinder for Hub Generation 2&3 Bearings
Contact UsAPPLICABLE PRODUCTS: HUB GENERATION 2&3 BEARINGS
Reviews
There are no reviews yet.