Certificate
Cobalt, nickel-based alloys are commonly used in the dental industry to make dental restorations.
Cobalt, nickel-based alloys are commonly used in the dental industry to make dental restorations. Because of their good mechanical properties and biology compatibility, they have become the best economic substitutes for gold and silver based alloys ( precious metals ).
Currently, we offer StelliteC5 cobalt-based and StelliteN9 nickel-based alloys for porcelain-fused-to-metal alloys and StelliteC3 cobalt-based alloys for bracket alloys. For the health of users, our dental alloys do not contain beryllium, cadmium and other elements. In order to adapt to the development of technology, we also provide customers with alloy powder products suitable for 3D printing process.
In order to produce dental alloys with high standards and meeting customer requirements, Kennametal Stellite has obtained ISO 13485 medical system and CE certification, and completed FDA registration in the United States;
Main technical performance indicators:
|
Ingredient ( % ) |
Cobalt 57-61 |
chromium 25-29 |
Molybdenum 4-6 |
Tungsten 6-8 |
|
Beryllium ≤ 0.02 |
cadmium ≤ 0.02 |
Ni ≤ 0.1 |
— |
|
|
physical properties |
||||
|
Specified plastic elongation strength Rp0.2 |
≥ 270MPa |
|||
|
Elongation after fracture |
≥ 5 % |
|||
|
Hardness HV30 |
≥ 350 |
|||
|
Coefficient of thermal expansion |
( 14.2 ± 0.5 ) × 10-6K-1 |
|||
|
modulus of elasticity Gpa |
≥ 150 |
|||
|
solid phase line temperature ° C |
1410 ± 50 |
|||
|
Liquidus temperature ° C |
1440 ± 50 |
|||
|
Bonding strength of metal and porcelain |
≥ 25MPa |
|||
|
Specific Gravity |
8.6 g / cm3 |
|||
|
corrosion resistance |
The total amount of metal ions released into the specified solution should not exceed 200 μ g / cm2 |
|||
|
anti-tarnish |
anti-tarnish |
|||
Related products
-
MA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment
Contact UsMA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment can process the slitting of the coil with different sizes to small strips for processing various kinds of metal coil materials.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
Reviews
There are no reviews yet.