Wall-Mounted LiFePO4 Lithium Battery 25.6V 200Ah for Residential Energy Storage
24V 200Ah Lithium Ion battery is the latest high-quality, high-cycle battery developed by DW SOLAR. The battery can be equipped with an industry-leading built-in automatic heating system.
24V 200Ah lithium battery specification
24V 200Ah Lithium Ion battery is the latest high-quality, high-cycle battery developed by DW SOLAR. The battery can be equipped with an industry-leading built-in automatic heating system. When the ambient temperature is lower than the designed temperature, the battery will automatically start the heating system to ensure that the battery can perform well in low temperature environments.
The standard version of the battery can still charge and discharge normally when the ambient temperature is below -10℃, but the charging time will be longer, and it cannot reach 100% discharge.
Product Parameter
|
Basic Information |
Battery Type-Chemistry |
LiFePO4 |
|
Nominal Voltage |
25.6V DC |
|
|
Voltage Range |
22V-29.2V |
|
|
Nominal Capacity |
200 Ah |
|
|
Rated Capacity |
5.12kWh |
|
|
Cycle Life |
3000(@80% DoD) |
|
|
Waterproof Level |
IP20 |
|
|
Dimensions(mm) |
550*390*210cmmm |
|
|
Weight (kg) |
45kg |
|
|
BMS |
BMS Build-in |
NO |
|
Charging Parameters |
Recommended Charging Current |
100A |
|
Max. Charging Current |
200A |
|
|
Recommended Charging Voltage |
25.6V |
|
|
Max. Charging Voltage |
29.2V |
|
|
Discharging Parameters |
Recommended Discharging Current |
100A |
|
Max.Discharging Current |
200A |
|
|
Temperature Parameters |
Discharging Temperature |
-20~60°C |
|
Charge Temperature |
0 ∽ 55℃ |
|
|
Storage Temperature |
-20~45°C |
|
| Certifcates |
CE, UN38.3 |
Related products
-
Fin Bending Machine
Contact UsCorrugated fin bending machine can save time of assembling and welding the corrugated tank at the same time reducing the leakage risk.
-
GF-AB02 Thermal Gel
Contact UsZS-GF-AB30 is a kind of appearance paste two-component molding high thermal conductivity silicone gel, can be heated curing, with the characteristics of the higher the temperature the faster the curing. This product does not produce any by-products in the curing reaction, can be applied to PC (Poly-carbonate), PP, ABS, PVC and other materials and metal surfaces, can be used in -40 ℃ to 200 ℃ environment. It can be used in the environment from -40℃ to 200℃. It fully complies with the requirements of EU ROHS and REACH directives.
-
Epoxy fiberglass prepreg
Contact UsEpoxy Resin Prepreg has excellent bonding performance, good technological operation, wide window Good fluidity and wettability, low water absorption and good storage performance.
-
HYLX/JL 16-40KW wall furnace exchanger
Contact UsSpecification:HYLX/JL 16-40KW wall furnace exchanger
Material:TP2 copper
Features:safety,efficiency,energy saving,environmental protection
Reviews
There are no reviews yet.