Oil Injector for Drying Room Chain
The oil injection system adopts PLC automatic control.
Oil Injector for Drying Room Chain Working Principle
The oil injection system adopts PLC automatic control. When the flower rack sprocket rotates one tooth, the sensor transmits a signal to the PLC, and the signal is fed back to the oil injector solenoid valve through the PLC. The action of the solenoid valve automatically drips oil to lubricate the flower rack chain.
Produce Description
1. Less maintenance work, reduced fuel consumption, reduced cleaning costs, and extended chain usage Life expectancy, making positive contributions to environmental protection; Optimal system control; Reduce the risk of accidents and improve workplace safety.
2. Extend the service interval; The oil discharge volume of each oil outlet can be adjusted to meet their respective needs (0-9999 ml/1000 h) to avoid thin oil pollution; The menu operation is simple, and precise oil injection can be controlled from 0 to 120 times/minute through PLC feedback,
3. It has an automatic timing oil injection function to ensure the permanent lubrication condition of the chain.
|
Characteristics of The Oil Injection System |
Customer Usage Advantages |
|
Using PLC Automatic Control to Complete Oil Injection Program |
Easy Operation |
|
The Sensor automatically detects the completion of oil filling and closing function |
Prevent excessive lubrication from contaminating products |
|
Accurate Oil Dripping and Proper Lubrication |
Extend the Service Life of The Chain |
|
Control the amount of oil dripping by adjusting the pressure of the oil injection tank |
Simple Adjustment Operation and Low Cost |
Related products
-
KPR Zeolite Rotary Concentrator
Contact UsUnder low temperature conditions, high air volume organic waste gas passes through the KPR Zeolite Rotary Concentrator, and VOC molecules adsorb its surface.
-
TNV direct fired incinerator
Contact UsDesign and manufacture by using the German EN12753 safety standard and the European ED. It is used Metal Painting and Printing LED Drying:
1. For stable industrial and mining conditions with a high temperature concentration of 1.5g/M3 or above.
2. Industrial and mining conditions with requirements for thermal energy recovery and utilization.
3. Industrial and mining conditions required for the operation of independent drying rooms.
4. Special effects on projects that reduce emissions and increase production -
NZ-03 Nano-polyester for Drilling Fluid
Contact UsNZ-03 is a multi-polymer composed of alkane sulfonate, alkyl ester, crosslinking agent. It forms nano-solid sealing material through special technology. The special functional groups on the molecular chain has strong adsorption ability, and strong adhesion properties. NZ-03 reduces pore-pressure transmission by sealing pore throats and micro-fractures due to reasonable size distribution of NZ-03 in muds. It can be used in various water-base drilling fluids. Its recommend dosage is 1.0 – 3.0% (v/v).
-
Regenerative thermal incinerator (RTO)
Contact UsCoating, textile, pharmaceutical, chemical organic waste gas of low concentration, big air volume;
Reviews
There are no reviews yet.