FR5 epoxy fiberglass laminate
FR-5 glass epoxy is similar to FR-4 but is designed for higher operating temperatures. It is able to keep its insulating..
FR-5
INSULATION BOARD
≥ 340 MPa
Flexural strength
perpendicular to laminations
≥ 33 KJ/m²
Charpy impact
strength parallel to laminations
≥ 35 Kv
Electric strength perpendicular to
laminations(at 90℃ in 25# transformer oil)
≥ 5*(10²*10²) MΩ
Insulation resistance
after immersion in water
94-V0 Level
Combustibility
30 mg
Water absorption
155 ℃
TG
FR-5 glass epoxy is similar to FR-4 but is designed for higher operating temperatures. It is able to keep its insulating and mechanical properties up to an operating temperature of 150 degrees Centigrade (FR-5). It maintains its properties in dry and humid conditions. Because of its better glass transition temperature coupled with its flame-retardant nature, FR-5 glass epoxy is often the preferred material for automobile producers.
https://www.bluesun-elec.com.cn/FR5-epoxy-fiberglass-laminate.html
Related products
-
Electronic Ignition Exothermic Weld 2.0 Wholesale And Factory Price (IEEE837,UL,IEC,ROHS)
Contact UsElectronic Ignition Exothermic welding 2.0(E-Plus2.0) is the latest generation of Sunlightweld.Compared with traditional exothermic weld,it’s more cost-saving, environmental-friendly, user-friendly.
-
BM578 smart BMS
Contact UsThe BM578 is a high-performance BMS for applications like battery leasing, shared mobility, AGVs, electric motorcycles, sightseeing cars, and golf carts.
-
-
1500VDC Solar Surge Protector | 40kA Type 1+2 DC SPD for PV Systems
Contact UsCYD1-GD-PV series surge protector, protect against lightning surge voltages in solar system.They must be installed in parallel on the DC networks to be protected and provide protection.
Reviews
There are no reviews yet.