Co2 Welding Wire Drawing Machine
Straight line drawing machine for Welding wire Co2
Raw material: China standard GB/T:ER50-6 , American standard AWS:ER70S-6
Welding wire Co2 drawing machine
Straight line drawing machine for Welding wire Co2
Raw material: China standard GB/T:ER50-6 , American standard AWS:ER70S-6
Composition:
About your requirement in welding wire Co2 product line;
we supply our very mature scheme: the first step—inlet 5.5mm, finished 2.3mm;
the second step-inlet 2.3 outlet 0.8mm with coating copper ,collecting finished wire in bobbin.
Automatic shrink packaging machine– Adapt to various heat shrinkable packaging materials such as PE and PVC
Related News Of Co2 Welding Wire Drawing Machine
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
12Kg Medium Torque Brushless Electric screwdriver Trigger start type
Contact UsBrushless DC voltage automatic medium torque electric screwdriver series
Model: GW-B6212LF
Torque: 2~12Kgf.cm
Free Speed: HI 2000 / LO 1500 r.p.m -
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.