BGM24FR12A-Bromide series

Dry	Drum wind oven： 100～120℃，4～6h； Cycling warm air： 100～120℃，4～6h； Vacuum drying oven： 100～120℃，3～4h；
Processing temperrature	Feed section：225～240℃ Compressing section：235～260℃ Metering secion：240～260℃
Injection pressure	70～130MPa
Packing pressure	40～90 MPa
Mold temperature	70～90℃
Back pressure	8～15MPa

BGM24FR12A

Test Item	Test Standard	Test Condition	Unit	Value
Others
Product Identification	ISO1043	——	——	PA6-(GF10+M20) FR
Filler Content	ISO3451-1	——	%	30
Density	ISO1183	23℃	g/cm³	1.52
Molding shrinkage(parallel/ normal)	ISO 294-4	——	%	0.3/0.8
Viscosity number	ISO307	96%H2SO4,0.5g/dl	ml/g	130
Mechanical
Flexural Strength	ISO178	23℃，2mm/min	MPa	85
Flexural Modulus	ISO178	23℃，2mm/min	MPa	3800
Tensile Strength	ISO527	Type I spline,50mm/min	MPa	50
Tensile Module	ISO527	Type I spline,1mm/min	MPa	/
Tensile Strain at Break	ISO527	Type I spline,50mm/min	%	2.8
Charpy Notched Impact Strength	ISO179/1eA	23℃	kJ/m2	12
Charpy Unnotched Impact Strength	ISO179/1eU	23℃	kJ/m2	40
Thermal
Melting Temperature	ISO11357	——	℃	220
Heat Distortion Temperature	ISO75-2	0.45MPa	℃	/
Heat Distortion Temperature	ISO75-2	1.8MPa	℃	/
Electrical
CTI	IEC60112	A	V	250
Volume Resistivity	IEC60093	——	Ω•cm	1014
Surface resistivity	IEC60093	——	Ω	1013
Flammability
Flammability	UL-94	1.6mm	Class	V-0
GWFIT	IEC60695	——	℃	/

All is typical data, only for reference, not the permit of quality assurance.

Reviews

There are no reviews yet.

Be the first to review “BGM24FR12A-Bromide series”