Harmonic Integrated Joint Module
Full Hardware FOC Technology, Chip-Level FPGA Development
Product Advantages
Full Hardware FOC Technology, Chip-Level FPGA Development
Hollow Cabling
Triple-Loop Control with All Frequencies at 20KHz for Fast Response
etherCat/canOpen Bus
16-bit ADC with 1MHz Sampling Rate
Power-Off Brake
Core Product Technologies
The core technology of the product lies in the harmonic integrated joint module, featuring a drive-control integrated design. The inner rotor structure enables hollow cabling, while diversified model options including 11, 14, 17, 20, 25, 32 and 40 series ensure flexible applications. With a compact and miniaturized profile and low power consumption, it adopts a pin-type brake mechanism that triggers mechanical locking instantly upon power loss, with an action time of less than 10ms.
The dual steel wheel design, integrating cross-roller bearings with steel wheels, reduces axial space occupation. By meshing two steel wheels with one flexspline, it mitigates stress from flexspline deformation, achieving smooth operation, high efficiency and positioning accuracy up to 20 arcseconds.
Performance Curve
| Model | Rh08 | Rh11 | Rh14 | Rh17 | Rh20 | Rh25 | |
|---|---|---|---|---|---|---|---|
| Motor Type | Outer Rotor Torque Motor | Inner Rotor Torque Motor | |||||
| Diameter | 40mm | 52mm | 70mm | 80mm | 90mm | 110mm | |
| Hollow Inner Diameter | 4.5mm | 8mm | 14mm | 14mm | 18mm | 18mm | |
| Weight | 188g | 495g | 1108g | 1350g | 1991g | 3098g | |
| Reverse Backlash | 15arcsec | ||||||
| Noise | <70db< /td> | ||||||
| Temperature Range | -20-80℃ | ||||||
| Working Voltage | 24-36V | 24-36V | 24-48V | 24-48V | 24-48V | 24-48V | |
| Rated Power | 36w | 120w | 168w | 200w | 300w | 500w | |
| Speed Ratio | 51 / 101 | 51 / 101 | 51 / 101 | 51 / 101 | 81 / 121 | 81 / 121 | |
| Rated Speed | 72rpm / 36rpm | 85.5rpm / 34.2rpm | 90rpm / 45rpm | 54rpm / 27rpm | 40.5rpm / 27rpm | 34.2rpm / 27rpm | |
| No-load Speed | 80rpm / 40rpm | 95rpm / 38rpm | 100rpm / 50rpm | 60rpm / 30rpm | 45rpm / 30rpm | 38rpm / 30rpm | |
| Rated Torque | 1.05Nm / 1.68Nm | 6.93Nm / 9.03Nm | 18.9Nm / 23.1Nm | 31.5Nm / 39.9Nm | 54.6Nm / 81.9Nm | 100.8Nm / 151.2Nm | |
| Peak Torque | 2.31Nm / 3.675Nm | 22.05Nm / 25.2Nm | 39.9Nm / 47.25Nm | 54.6Nm / 69.3Nm | 109.2Nm / 163.8Nm | 213.6Nm / 231Nm | |
| Phase Current Full Scale | 4.0a | 14.0a | 20.0a | 22.5a | 36.0a | 58.0a | |
| Rated Bus Current | 1.5a | 5.0a | 7.0a | 8.4a | 12.5a | 20.0a | |
| Static Bus Current | 0.04a | 0.04a | 0.08a | 0.08a | 0.12a | 0.12a | |
| Encoder Precision | 19bit | ||||||
| Encoder Type | Single Magnetic Encoder + Zero Positioning | Dual Magnetic Encoder | |||||
| Electromagnetic Brake | Standard Version with Brake | Brake Included (Default) | |||||
Related products
-
Oblique Cut Lamination
Contact UsShearing is a common cutting method for silicon steel sheets. Silicon steel is sheared with a carbide blade, which can cut the required size and shape. Shear method on the thermal impact of silicon steel core is small, the kerf is smoother, but the shear force is more damage, easy to produce deformation and burr. Therefore, the shear method is suitable for cutting smaller lamination, the requirement of surface flatness is not too high occasions.
Our company has introduced advanced oblique cut equipment, which is able to cut large silicon steel core to meet more needs of customers. -
DIN-EN 856 4SP
Contact UsSTANDARD: SAE J517 TYPE 100 R12
TUBE: oil resistant synthetic rubber
REINFORCEMENT: four spiral high strength stainless steel wire
COVER: oil, abrarion & weather resistant synthetic rubber
TEMPERATURE RANGE: -40℃ /+100℃ ; -40 °F/+212°F LT-55 & HT150℃ customizable
APPLICATION: suitable for high temperature and medium pressure hoses under harsh conditions, machine tools and agricultural applications, construction machinery, oil drilling, mining machinery, steel, chemical industry, energy, rail transit, food processing and shipbuilding -
Customized Special Shaped Strong Magnets
Contact Us1.Customized Special Shaped Strong Magnets
2.Size:customized
3.Grade:selectable
4.Cladding:ZN/NI/NICUNI/Black epoxy -
Large industrial gear
Contact UsThe company’s main products are high precision involute cylindrical gears,We specialize in manufacturing of gears products such as spur gear,helical gear, herringbone gear, external spline, internal spline, crownedgear, synchronous pulley, sprocket.
Reviews
There are no reviews yet.