Auatomatic reel cable tie machine with fixed type
The Swift fixed integrated cable tie machine is a high-efficiency automation device designed for large-scale wire harness bundling.
Parameters：
|
Model |
SWT25100FC |
|
|
Cable Tie Spec |
2.5X 100 mm |
|
|
Min binding Dia. |
Ø2mm |
|
|
Max binding Dia |
Ø18mm |
|
|
Tact Time |
1.1s/PCS |
|
|
Electric Power |
Host AC 220V 50/60 Hz |
|
|
Gun DC 24V （Auto switch） |
||
|
Pneumatic Pressure |
5 Kg/ cm² |
|
|
Size(The machine can put above on the assembly line) |
Host:L655 XW467 XH230mm （Height of the tray containing material: 740） |
|
|
Gun |
L260X H77 X T46mm |
|
|
Weight |
HostHoH |
30 kg |
|
Gun |
4.5kg |
|
|
Model |
SWT36200FC |
|
|
Cable Tie Spec |
3.6X 200 mm |
|
|
Min binding Dia. |
Ø15mm |
|
|
Max binding Dia |
Ø42mm |
|
|
Tact Time |
1.3s/PCS |
|
|
Electric Power |
Host AC 220V 50/60 Hz |
|
|
Gun DC 48V （Auto switch） |
||
|
Pneumatic Pressure |
5 Kg/ cm² |
|
|
Size(The machine can put above on the assembly line) |
Host:L710 XW470 XH230mm （Height of the tray containing material: 740） |
|
|
Gun |
L299X H240X T149M |
|
|
Weight |
HostHoH |
30 kg |
|
Gun |
4.2kg |
|
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
Used NSC Schlumberger GN6 Gilling Machine
Contact UsYear: 1986
Spinning production line
Mixed belt: GN6 solid ball forming machine barrel
One needle: GN6 cylinder diameter 700 * 1000mm, 1 head and 1 cylinder, self leveling
Two needles: GN6 cylinder diameter 700 * 1000mm, one head and one cylinder
Three needles: GN6 cylinder diameter 600 * 1000mm, 2 heads and 2 cylinders
According to your requirements, we can transform it into a size suitable for your production needs! -
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
Reviews
There are no reviews yet.