Aluminum Foil

The advantage properties of aluminum alloy are light weight, excellent electrical and thermal conductivity, high corrosion resistance and ductility.

Aluminum alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminum alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminum alloy is one of the lightest metals. The application of products ranges from precision technology to daily commodities.

Mechanical Properties

Tensile Strength, Ultimate

60 ~ 210 Mpa

Tensile Strength, Yield

20 ~ 180 Mpa

Hardness, Brinell

20 – 65

Product Specification and Size :

Standard Specification: GB/T 3198, EN 546

Alloy and Temper
Alloy	Temper
1xxx: 1050, 1051A, 1060, 1100, 1145, 1235, 1200	O, H14, H16, H18, H19, H22, H24, H26
3xxx: 3003	O, H14, H16, H18, H19, H22, H24, H26
8xxx: 8011, 8011A, 8079	O, H18, H19, H22, H24, H26

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminum Products

Alloy Series	Chinese Standard	American Standard	European Standard
1xxx Series	1050	–	–
	1050A	–	EN AW-1050A
	1060	1060	–
	1100	1100	–
	1145	1145	–
	1200	–	EN AW-1200
	1235	1235	EN AW-1235
3xxx Series	3003	3003	EN AW-3003
8xxx Series	8011	–	–
	8011A	–	EN AW-8011A
	8079	–	EN AW-8079

Temper Designation (For Reference)

Temper	Definition
O	Annealed
H14 H16 H18 H19	Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, Full Hard Strain Hardened, Extra Hard
H22 H24 H26	Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard Strain Hardened and Partially Annealed, Full Hard
H28	Strain Hardened and Partially Annealed, Full Hard

Available Size Range

Dimension	Range
Thickness	0.006 ~ 0.2 mm
Width	200 ~ 1,800 mm

– Surface Condition:
One side bright, the other side matter (for double rolled)
Two sides bright (for single rolled)
– Surface Treatment: Lubrication, Lamination, Coating
– Core Type and Size :
Type: Aluminum, Sheel, Fiber
Core ID: 75mm, 76.2mm, 150mm, 152.4mm, 300mm, 400mm

Application

Aluminum and aluminum alloy foil can be widely applied in containers, packaging, household & institutional foil, food service products, foil building products, aluminum foil capacitors, aluminum foil finstock, aluminum foil strip conductor, aluminum honeycomb, aluminum foil printing plates, nameplates & product labels, caul stock, foil printing stocks, etc.

Type	Application
Food Packaging	Beverage can end, can tap, cap stock, etc.
Construction	Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation	Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc.
Electronic Appliance	Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods	Parasols and umbrellas, cooking utensils, sports equipment, etc.
Other	Military, color coated aluminum sheet

Chemical Composition (For Reference)

Chemical Composition conforms to Chinese, American and European standard specification

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others: Each	Others: Total	Al: Min.
1050	0.25	0.40	0.05	0.05	0.05	–	0.05	0.03	0.03	–	99.50
1050A	0.25	0.40	0.05	0.05	0.05	–	0.05	0.03	0.03	–	99.50
1060	0.25	0.35	0.05	0.03	0.03	–	0.05	0.03	0.03	–	99.60
1100	0.95 Si + Fe		0.05~0.20	0.05	–	–	0.10	–	0.05	0.15	99.0
1200	1.00 Si + Fe		0.05	0.05	–	–	0.10	0.05	0.05	0.15	99.0
1145	0.55 Si + Fe		0.05	0.05	0.05	–	0.05	0.03	0.03	–	99.45
1235	0.65 Si + Fe		0.05	0.05	0.05	–	0.10	0.06	0.03	–	99.35
3003	0.60	0.70	0.05~0.20	1.0~1.5	–	–	0.10	–	0.05	0.15	remainder
8011	0.5~0.9	0.6~1.0	0.10	0.20	0.05	0.05	0.10	0.08	0.05	0.15	remainder
8011A	0.4~0.8	0.5~1.0	0.10	0.10	0.10	0.10	0.10	0.05	0.05	0.15	remainder
8079	0.05~0.3	0.7~1.3	0.05	–	–	–	0.10	–	0.05	0.15	remainder

Reviews

There are no reviews yet.

Be the first to review “Aluminum Foil”

Reviews

Related products

12Kg Medium Torque Brushless Electric screwdriver Trigger start type

VMC 500 CNC Vertical Machining Center

3MG132G CNC automatic track grinder for ball bearing inner ring

Water-cooled cabinet