NK Air end
The product includes the following models: NK-4PV)、NK-7.5PV、NK-10PV、NNK-15PV、NK-20PV、NK-20PV、NK-30PV
| MODEL NO. | POWER (HP) |
VOLTAGE | PHASE | Frequency | MAX.PRESSURE (BAR) |
AIR DELIVERY (L/MIN) |
| NK-4PV | 4HP | 220V | 1PH | 50HZ | 8/10 BAR | 300 |
| NK-4PV | 4HP | 380V | 3PH | 50HZ | 8/10 BAR | 300 |
| NK-7.5PV | 7.5HP | 380V | 3PH | 50HZ | 8/10 BAR | 680 |
| NK-7.5PV | 7.5HP | 380V | 3PH | 50HZ | 16BAR | 330 |
| NK-10PV | 10HP | 380V | 3PH | 50HZ | 8/10 BAR | 1050 |
| NK-10PV | 10HP | 380V | 3PH | 50HZ | 16BAR | 500 |
| NK-15PV | 15HP | 380V | 3PH | 50HZ | 8/10 BAR | 1450 |
| NK-15PV | 15HP | 380V | 3PH | 50HZ | 16BAR | 700 |
| NK-20PV | 20HP | 380V | 3PH | 50HZ | 8/10 BAR | 2000 |
| NK-20PV | 20HP | 380V | 3PH | 50HZ | 16BAR | 950 |
| NK-30PV | 30HP | 380V | 3PH | 50HZ | 8/10 BAR | 3000 |
| NK-30PV | 30HP | 380V | 3PH | 50HZ | 16BAR | 1600 |
Related products
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
Capacity 1258ML Hot Filling Suitable For Krones Machine
Contact UsBottle Volume: 1258ml
Bottle Type: hot-filling bottle
Suitable Equipment: Krones
Packing Method: Standard packing for export. -
MA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment
Contact UsMA-(0.8~4MM)×1300MM Steel Coil Slitting Equipment can process the slitting of the coil with different sizes to small strips for processing various kinds of metal coil materials.
Reviews
There are no reviews yet.