In-line Pressure Balanced Bellows Expansion Joint
It consists of two working bellows at both ends and a balance bellows in the middle, as well as structural parts such as tie rods and end plates
In-line Pressure Balanced Bellows Expansion Joint-It consists of two working bellows at both ends and a balance bellows in the
middle, as well as structural parts such as tie rods and end plates, which are
mainly used to absorb axial displacement and can balance the pressure and thrust
of the bellows expansion joint;
Specification: DN50-DN5000;
Working pressure: 0.25-1.6Mpa.
Related products
-
VMC 500 CNC Vertical Machining Center
Contact UsThe machine is suitable for communication, medical equipment, power tools, 3C products processing,etc.Three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
High-efficiency activated carbon attachment device
Contact UsHigh-efficiency activated carbon attachment device can quickly absorb pollutants in exhaust gas. The exhaust gas containing pollutants is powered by a fan and enters the activated carbon adsorber under negative pressure.
-
Dry type transformer
Contact UsSafe, fireproof, non-polluting, can be run directly in the load center; using domestic advanced technology, high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, long service life; low loss, low noise , obvious energy saving effect, maintenance-free
Reviews
There are no reviews yet.